Laboratory testing has shown that when cleaned regularly this surface: - Continuously reduces bacterial* contamination, achieving 99.9% reduction within 2 hours of exposure. - Kills greater than 99 9% of Gram-negative and Gram-positive bacteria* within 2 hours of exposure. - Delivers continuous and ongoing antibacterial* (bactericidal*) action, remaining effective in killing greater than 99.9% of bacteria* within 2 hours. - Kills greater than 99.9% of bacteria* within two hours and continues to kill 99% of bacteria* even after repeated contaminations. - Helps inhibit the buildup and growth of bacteria* within 2 hours of exposure between routine cleaning and sanitizing steps. - [This product/component name] is made (out of)(from) a (copper)(touch) surface that continuously kills bacteria left behind [by dirty hands][on the surface] killing more than 99.9% of bacteria* within 2 hours. - Staphylococcus aureus, Enterobacter aerogenes, Methicillin-Resistant Staphylococcus aureus (MRSA), Escherichia coli O157:H7, Pseudomonas aeruginosa and, Vancomycin - Resistant Enterococcus faecalis (VRE).
DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Proper Care and Use. Clean and sanitize according to standard practice. Healthcare facilities must maintain the product in accordance with infection control guidelines. The use of this surface is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. This surface has been shown to reduce microbial contamination, but does not necessarily prevent cross contamination. This surface may be subject to recontamination and the level of active bacteria at any time will depend on the frequency and timing of recontamination and cleanliness of the surface (among other factors). In order to have proper antimicrobial effect, this product must be cleaned and maintained according to the directions for use. Do not wax, paint, lacquer, varnish, or otherwise coat this product.
Routine cleaning to remove dirt and filth is necessary for good sanitation and to assure the effective antibacterial (bactericidal) performance of this surface. Cleaning agents typically used for traditional hard, non-porous touch surfaces are permissible. The appropriate cleaning agent depends on the type of soiling and the measure of sanitization required. Normal tarnishing or wear of this surface will not impair antibacterial (bactericidal) effectiveness. Not approved for direct food contact or food packaging uses. [Items exposed to outdoor environmental conditions arp ret represenUurve of indoor laboratory test conditions, and, therefore, rrny in.pa.t reduced efficacy if not cleaned when visibly soiled.] STORAGE AND DISPOSAL Dispose of by recycling or put in trash.
WARRANTY STATEMENT If used as intended, this product is wear-resistant and lie durable antibacterial (bactericidal) properties will remain effective for as long as the product nnnhs in place and is used as directed. EPA Reg. No. 85353-5 EPA Est. No. [Product Manufacturer Number]- 853.c 3-xx Manufactured by: [Product Manufacturer Company Name and Address] Global Brass and Copper, Inc. 427 North Shamrock Street East Alton, IL 62024It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Proper Care and Use. Clean and sanitize according to standard practice. Healthcare facilities must maintain the product in accordance with infection control guidelines. The use of this surface is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. This surface has been shown to reduce microbial contamination, but does not necessarily prevent cross contamination. This surface may be subject to recontamination and the level of active bacteria at any time will depend on the frequency and timing of recontamination and cleanliness of the surface (among other factors). In order to have proper antimicrobial effect, this product must be cleaned and maintained according to the directions for use.
Do not wax, paint, lacquer, varnish, or otherwise coat this product.
Routine cleaning to remove dirt and filth is necessary for good sanitation and to assure the effective antibacterial (bactericidal) performance of this surface. Cleaning agents typically used for traditional hard, non-porous touch surfaces are permissible. The appropriate cleaning agent depends on the type of soiling and the measure of sanitization required. Normal tarnishing or wear of this surface will not impair antibacterial (bactericidal) effectiveness. Not approved for direct food contact or food packaging uses. [Items exposed to outdoor environmental conditions arp ret represenUurve of indoor laboratory test conditions, and, therefore, rrny in.pa.t reduced efficacy if not cleaned when visibly soiled.] STORAGE AND DISPOSAL Dispose of by recycling or put in trash. WARRANTY STATEMEN P If used as intended, this product is wear-resistant and lie durable antibacterial (bactericidal) properties will remain effective for as long as the product nnnhs in place and is used as directed. EPA Reg. No. 85353-5 EPA Est. No. [Product Manufacturer Number]- 853.c 3-xx Manufactured by: [Product Manufacturer Company Name and Address] Global Brass and Copper, Inc. 427 North Shamrock Street East Alton, IL 62024